 |
|
Dog Guard® offers three
different types
of Receivers that are designed to contain small to
large-sized dogs. The three receivers are listed
below, click their links for a detailed
explanation:
DG 9 XT - for "medium to
stubborn and tough to train" dogs
DG 5000 - for "small, timid,
passive and up to medium sized" dogs
NEW!! DG Micro - for "tiny
pets weighing 1 to 10 pounds"
|
DG 9 XT
Features
The DG 9 XT receiver is designed to handle the
“medium to stubborn and tough-to-train” dogs. It
works well with dogs that are runners such as
Huskies, Labs and hunting dogs.
This receiver is waterproof and has a LIFE
TIME warranty provided it was not damaged or
abused. Dog Chews are covered under the LIFE
TIME warranty. Your Dog Guard professional dealer
will show you ways to prevent dog chews.
The fail safe feature shuts the receiver down
30 seconds after it has been activated. The
receiver will reset itself once it has been
removed from the signal field for 3 seconds. This
feature assures that your pet will not be
continuously stimulated should he become caught in
the signal field.
The DG 9 XT receiver has the highest pulsating
stimulus in the industry. Your Dog Guard
professional dealer will adjust the stimulus
to your pet’s temperament.
This receiver can be ordered in the encoded
mode or in the non-encoded mode; with or without a
one-second delay.
The receiver in the encoded mode is immune
to stray signals and provides up to 32 levels of
initial stimulation that is controlled at the
transmitter. When the pet enters the first
signal field, it will receive a warning tone or
stimulation. Should the pet stray into the second
signal zone, the receiver will automatically
increase to a stronger stimulus. The maximum
stimulus can be controlled by using shunts.
When ordered with a one-second delay, the pet
will receive a one-second audible warning prior to
stimulation; if he does not retreat from the
signal field, he will receive a stimulus.
It is available in two frequencies.
Dimensions:
Width: 1.1875” • Height: 1.125” • Length:
1.25” Material: Lexan/ABS • Probe Spacing:
1.125” • Weight: 2.2 oz.
 |
| |
| |
 
back to top
DG 50000
Features
This DG 5000 receiver is designed to handle
“small, timid, passive and up to medium sized”
dogs.
This receiver is waterproof and has a LIFE
TIME warranty provided it was not damaged or
abused. Dog Chews are covered under the LIFE
TIME warranty. Your Dog Guard professional dealer
will show you ways to prevent dog chews.
The fail safe feature shuts the receiver down
30 seconds after it has been activated. The
receiver will reset itself once it has been
removed from the signal field for 3 seconds. This
feature assures that your pet will not be
continuously stimulated should he become caught in
the signal field.
The DG 5000 receiver provides pulsating
stimulus that your Dog Guard professional dealer
will adjust to your pet’s temperament.
This receiver can be ordered in the encoded
mode or in the non-encoded mode; with or without a
one-second delay.
The receiver in the encoded mode is immune
to stray signals and provides up to 32 levels of
initial stimulation that is controlled at the
transmitter. When the pet enters the first
signal field, it will receive a warning tone or
stimulation. Should the pet stray into the second
signal zone, the receiver will automatically
increase to a stronger stimulus. The maximum
stimulus can be controlled by using shunts.
When ordered with a one-second delay, the pet
will receive a one-second audible warning prior to
stimulation; if he does not retreat from the
signal field, he will receive a stimulus.
It is available in two frequencies.
Dimensions:
Width: 1.125” • Height: 1.125” • Length:
2” Material: Lexan/ABS • Probe Spacing: 1.125”
• Weight: 2 oz.
|
| |
| |
 
back to top
DG Micro
Features
This DG Micro receiver is designed to contain
“tiny pets” weighing 1 to 10 pounds.
This receiver is waterproof and has a LIFE
TIME warranty provided it was not damaged or
abused. Dog Chews are covered under the LIFE
TIME warranty. Your Dog Guard professional dealer
will show you ways to prevent dog chews.
The fail safe feature shuts the receiver down
30 seconds after it has been activated. The
receiver will reset itself once it has been
removed from the signal field for 3 seconds. This
feature assures that your pet will not be
continuously stimulated should he become caught in
the signal field.
The DG Micro receiver provides pulsating
stimulus that your Dog Guard professional dealer
will adjust to your pet’s
temperament.
This receiver can be ordered in the encoded
mode or in the non-encoded mode; with or without a
one-second delay.
The receiver in the encoded mode is immune
to stray signals and provides up to 32 levels of
initial stimulation that is controlled at the
transmitter. When the pet enters the first
signal field, it will receive a warning tone or
stimulation. Should the pet stray into the second
signal zone, the receiver will automatically
increase to a stronger stimulus. The maximum
stimulus can be controlled by using shunts.
When ordered with a one-second delay, the pet
will receive a one-second audible warning prior to
stimulation; if he does not retreat from the
signal field, he will receive a stimulus.
It is available in two frequencies.
Dimensions:
Width: 1.125” • Height: 1” • Length:
1.875” Material: Lexan/ABS • Probe Spacing:
1.125” • Weight: 1.8 oz.
| | |
